Scripts

rebuild-totals

Recomputes persistent totals (uptime, accumulated shares, and cumulative electricity cost, which survive miner reboots) from each miner’s full history. Useful after an installation issue (totals.json lost or corrupted), a data migration, or to backfill existing history from before this feature was enabled.

Go to The fleet →

>_ Terminal

# from the folder containing config/dashboard.yml
$ curl -fsSLO https://github.com/joakim-ribier/axeos-dashboard/releases/download/latest/rebuild-totals-arm64
$ chmod +x rebuild-totals-arm64
$ ./rebuild-totals-arm64 -config config/dashboard.yml

>_ Result

rebuild-totals: DRY RUN -- nothing will be written
data dir: /home/pi/axeos-dashboard/storage/data/bitaxes
miners: 5
fallback electricity rate (for polls recorded before rate-tracking existed): 0.1915/kWh

[G602-1 / aabbccddee01]
  files: 181, lines: 45273 (skipped: 1), reboots detected: 22
  history: 2026-01-09 17:29 -> 2026-09-09 07:04
  total uptime: 179j 13h 44m, total shares: accepted=2153000 rejected=734, total cost: 14.13
  scan time: 9.324s

[G602-2 / aabbccddee02]
  files: 174, lines: 44267 (skipped: 0), reboots detected: 22
  history: 2026-01-16 18:18 -> 2026-09-09 07:04
  total uptime: 175j 7h 26m, total shares: accepted=1960176 rejected=807, total cost: 15.95
  scan time: 7.92s

[G602-3 / aabbccddee03]
  files: 156, lines: 41773 (skipped: 1), reboots detected: 57
  history: 2026-02-04 12:04 -> 2026-09-09 07:04
  total uptime: 155j 12h 43m, total shares: accepted=1103582 rejected=1070, total cost: 13.84
  scan time: 7.647s

[G602-4 / aabbccddee04]
  files: 156, lines: 41769 (skipped: 2), reboots detected: 61
  history: 2026-02-04 12:04 -> 2026-09-09 07:04
  total uptime: 155j 12h 21m, total shares: accepted=1099062 rejected=924, total cost: 13.76
  scan time: 8.569s

[NerdqaxePlusPlus / aabbccddee05]
  files: 142, lines: 39913 (skipped: 2), reboots detected: 44
  history: 2026-04-21 14:22 -> 2026-09-09 07:04
  total uptime: 142j 8h 15m, total shares: accepted=1869958 rejected=1318, total cost: 59.14
  scan time: 7.661s

==================== SUMMARY ====================
mode: DRY RUN -- nothing was written
miners: 5 processed, 0 skipped
lines replayed: 212995 (skipped: 6), reboots detected: 206
elapsed: 41.122s
(a real run over the same data should take about as long)

💡 Tip — replace arm64 with amd64 depending on your machine’s architecture. No repo clone or Go install needed, the binary is ready to run.

• Dry-run by default — the command above only shows what it would do; add -dry-run=false to actually write.
• One miner — -miner <mac|hostname|ip> to only recompute a single miner.
• Fallback electricity rate — data recorded before electricity-rate tracking existed has no such field in its .jsonl; those lines are billed at -fallback-rate <€/kWh> (defaults to the currently configured rate).
• Safe by design — an existing totals.json is first copied to totals.json.bak; the write is atomic (never a half-written file); the .jsonl/latest.json files are never modified.